Çözüldü Nokia 3 TA-1020 IMEI Repair

ysfzyemr

Süper Kullanıcı
Genel Moderator
Katılım
4 Eki 2018
Mesajlar
1,433
Tepkime puanı
1,708
Puanları
113
Yaş
34
Konum
İstanbul
Çevrimiçi
Merhaba GSM Turkey Üyeleri bu paylaşacağım konuda Nokia 3 TA-1020 cihazına ait IMEI repair başarı raporunu paylaşacağım. Ben bu işlemi Nck Tool ile yaptım. Bu araç ücretli bir araçtır.


Kod:
Selected connection metod: Flash Connection
 Exe version: NCKDongle AndroidMTK 2.8.3
 Selected phone: AUTO
 Action : IMEI REPAIR.
 Keep "VOL-" button untill inserting USB cable.
 For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable.
 For some phones need to keep "VOL+" button untill inserting USB cable.
 Detected(9) : MediaTek PreLoader USB VCOM (Android) (COM9)
 [9] \\?\usb#vid_0e8d&pid_2000#5&1cec4248&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
 Boot mode: Preloader
 BBCHIP: 335 0 ca00
 Using Algo 2.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6737M
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 02
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 2 GB  DRAM
 ----------------------------------------------------
 EMMC: (117Gb+16384Mb) UNKNOWN_EMMC_DEVICE
 EMMC FW VERSION: 10:00:00:00:00:00:00:00
 EMMC CID: 13014E51324A393652 : 00000000000000
 EMMC UA SIZE: 0x3ab400000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3ac000000      [14.688 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected(14) : MediaTek DA USB VCOM (Android) (COM14)
 [14] \\?\usb#vid_0e8d&pid_2001#5&1cec4248&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
 Reading imei
 IMEI[1]: 356802082009977
 Backup saved: C:\ProgramData\Android_MTK_Backup_Folder\nvram_backup\FLASH_MODE_NVRAM_MT6737M_356802082009977__05_22_2023_15_18_47.zip
 Writing imei
 IMEI[1] TO UPDATE:
 Generic IMEI OK
 Writing imei in proinfo file.
 Write proinfo ok.
 Processing dinamic imei.
 IMEI[1] TO UPDATE:
 Write done
 Wait untill phone will start charging.
 [0]All done.

Lütfen konu altına yorum yaparken Teşekkürler, Elinize sağlık, süper, sağol, helal olsun gibi kelimeler yazıp konuları kirletmeyelim. Herkes aradığını bu mesajlar yüzünden bulamıyor. Altta beğen butonuna basmanız yeterlidir. Konu ile ilgili sorununuzu veya çözümünüz varsa yorum yapın. Konu ile alakasız cevaplar silinecektir.
 
Geri
Üst Alt