silivriserdar

Genel Moderator
Katılım
21 Haz 2018
Mesajlar
21,971
Tepkime puanı
44,594
Puanları
113
Yaş
40
Çevrimdışı
Merhaba GSM Turkey Üyeleri bu paylaşacağım konuda Samsung Galaxy A7 SM-A710F cihazına nasıl IMEI repair ve Patch Certificate İşlemi yapılır onu anlatacağım.

Ben bu işlemi Z3X Box Samsung Tool ile yaptım. Bu araç ücretli bir araçtır.

IMEI REPAİR​

Kod:
 REPAIR INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically, 
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press 'Repair' button.
7. Press 'Patch Certificate' if you have network problem after repairing.
8. Press 'Reset EFS' if you need to reset it.
Be carefully, do not perform this without necessity. Backup will be created automatically.

Repair DRK (Use it if you have DRK damaged (phone stuck on boot)):
1. Power on the phone in download mode (turn off phone, hold vol.down + Camera + Power). 
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Press 'Repair DRK' button. 

Operation: Repair
Selected model: SM-A710F
Software version: 42.11

Waiting ADB device... OK
Reading phone info...
Model: SM-A710F
Android version: 7.0
PDA version: A710FXXU2CQE3
CSC version: A710FOJV2CQE2
Phone version: A710FDXXU2CQE1
Product code: SM-A710FZWFEGY
CSC country code: Egypt
CSC sales code: EGY
Phone SN: RF8H60JAD9M
IMEI: 
HW version: MP 0.000
RF cal date: 20160607
Chip name: EXYNOS7580
Modem board: SHANNON310
Security patch: 2017-05-01
Boot Warranty bit: 1
SIM State: ABSENT,ABSENT
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Reading data... OK
Detecting MODEM... OK
Reading MODEM... OK
Calculating... OK
Writing zTool... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data... OK
HWID: 3F FA 40 8F 7F 3B 87 49 86 77 34 07 25 86 57 FD
Calculating... OK
Repairing... OK
Writing NV data... OK
Rebooting phone... OK
Repair done

Done with Samsung Tool PRO v.42.11

PATCH CERTİFİCATE​

Kod:
 REPAIR INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically, 
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press 'Repair' button.
7. Press 'Patch Certificate' if you have network problem after repairing.
8. Press 'Reset EFS' if you need to reset it.
Be carefully, do not perform this without necessity. Backup will be created automatically.

Repair DRK (Use it if you have DRK damaged (phone stuck on boot)):
1. Power on the phone in download mode (turn off phone, hold vol.down + Camera + Power). 
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Press 'Repair DRK' button. 

Operation: Patch CERT
Selected model: SM-A710F
Software version: 42.11

Waiting ADB device... OK
Reading phone info...
Model: SM-A710F
Android version: 7.0
PDA version: A710FXXU2CQE3
CSC version: A710FOJV2CQE2
Phone version: A710FDXXU2CQE1
Product code: SM-A710FZWFEGY
CSC country code: Egypt
CSC sales code: EGY
Phone SN: RF8H60JAD9M
IMEI: 
HW version: MP 0.000
RF cal date: 20160607
Chip name: EXYNOS7580
Modem board: SHANNON310
Security patch: 2017-05-01
Boot Warranty bit: 1
SIM State: ABSENT,ABSENT
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Reading data... OK
Detecting MODEM... OK
Reading MODEM... OK
Calculating... OK
Writing zTool... OK
Initialization zTool... OK
Rebooting phone... OK
Patching CERT check... done
Done with Samsung Tool PRO v.42.11
 
Kod:
 REPAIR INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically, 
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press 'Repair' button.
7. Press 'Patch Certificate' if you have network problem after repairing.
8. Press 'Reset EFS' if you need to reset it.
Be carefully, do not perform this without necessity. Backup will be created automatically.

Repair DRK (Use it if you have DRK damaged (phone stuck on boot)):
1. Power on the phone in download mode (turn off phone, hold vol.down + Camera + Power). 
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Press 'Repair DRK' button. 

Operation: Repair
Selected model: SM-A710F
Software version: 43.23

Waiting ADB device... OK
Reading phone info...
Model: SM-A710F
Android version: 6.0.1
PDA version: A710FXXU2BQC8
CSC version: A710FOJV2BQC3
Phone version: A710FDXXU2BQC2
Product code: SM-A710FZWATUR
CSC country code: TURKEY
CSC sales code: TUR
Phone SN: RF8H70SCX4D
IMEI: 
HW version: MP 0.200
RF cal date: 20160709
Chip name: EXYNOS7580
Modem board: SHANNON310
Security patch: 2017-04-01
Boot Warranty bit: 1
SIM State: ABSENT
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Reading data... OK
Detecting MODEM... OK
Reading MODEM... OK
Calculating... OK
Writing zTool... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data... OK
HWID: 09 D3 2F 6D 80 AD 00 FB 64 92 BD 4C 94 4E EB A2
Calculating... OK
Repairing... OK
Writing NV data... OK
Rebooting phone... OK
Repair done
Done with Samsung Tool PRO v.43.23

REPAIR INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically, 
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press 'Repair' button.
7. Press 'Patch Certificate' if you have network problem after repairing.
8. Press 'Reset EFS' if you need to reset it.
Be carefully, do not perform this without necessity. Backup will be created automatically.

Repair DRK (Use it if you have DRK damaged (phone stuck on boot)):
1. Power on the phone in download mode (turn off phone, hold vol.down + Camera + Power). 
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Press 'Repair DRK' button. 

Operation: Patch CERT
Selected model: SM-A710F
Software version: 43.23

Waiting ADB device... OK
Reading phone info...
Model: SM-A710F
Android version: 6.0.1
PDA version: A710FXXU2BQC8
CSC version: A710FOJV2BQC3
Phone version: A710FDXXU2BQC2
Product code: SM-A710FZWATUR
CSC country code: TURKEY
CSC sales code: TUR
Phone SN: RF8H70SCX4D
IMEI: 
HW version: MP 0.200
RF cal date: 20160709
Chip name: EXYNOS7580
Modem board: SHANNON310
Security patch: 2017-04-01
Boot Warranty bit: 1
SIM State: ABSENT
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Reading data... OK
Detecting MODEM... OK
Reading MODEM... OK
Calculating... OK
Writing zTool... OK
Initialization zTool... OK
Rebooting phone... OK
Patching CERT check... done

Done with Samsung Tool PRO v.43.23
 
Kod:
 REPAIR INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press 'Repair' button.
7. Press 'Patch Certificate' if you have network problem after repairing.
8. Press 'Reset EFS' if you need to reset it.
Be carefully, do not perform this without necessity. Backup will be created automatically.

Repair DRK (Use it if you have DRK damaged (phone stuck on boot)):
1. Power on the phone in download mode (turn off phone, hold vol.down + Camera + Power).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Press 'Repair DRK' button.

Operation: Repair
Selected model: SM-A710F
Software version: 43.23

Waiting ADB device... OK
Reading phone info...
Model: SM-A710F
Android version: 6.0.1
PDA version: A710FXXU2BQC8
CSC version: A710FOJV2BQC3
Phone version: A710FDXXU2BQC2
Product code: SM-A710FZWATUR
CSC country code: TURKEY
CSC sales code: TUR
Phone SN: RF8H70SCX4D
IMEI:
HW version: MP 0.200
RF cal date: 20160709
Chip name: EXYNOS7580
Modem board: SHANNON310
Security patch: 2017-04-01
Boot Warranty bit: 1
SIM State: ABSENT
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Reading data... OK
Detecting MODEM... OK
Reading MODEM... OK
Calculating... OK
Writing zTool... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data... OK
HWID: 09 D3 2F 6D 80 AD 00 FB 64 92 BD 4C 94 4E EB A2
Calculating... OK
Repairing... OK
Writing NV data... OK
Rebooting phone... OK
Repair done
Done with Samsung Tool PRO v.43.23

REPAIR INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press 'Repair' button.
7. Press 'Patch Certificate' if you have network problem after repairing.
8. Press 'Reset EFS' if you need to reset it.
Be carefully, do not perform this without necessity. Backup will be created automatically.

Repair DRK (Use it if you have DRK damaged (phone stuck on boot)):
1. Power on the phone in download mode (turn off phone, hold vol.down + Camera + Power).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Press 'Repair DRK' button.

Operation: Patch CERT
Selected model: SM-A710F
Software version: 43.23

Waiting ADB device... OK
Reading phone info...
Model: SM-A710F
Android version: 6.0.1
PDA version: A710FXXU2BQC8
CSC version: A710FOJV2BQC3
Phone version: A710FDXXU2BQC2
Product code: SM-A710FZWATUR
CSC country code: TURKEY
CSC sales code: TUR
Phone SN: RF8H70SCX4D
IMEI:
HW version: MP 0.200
RF cal date: 20160709
Chip name: EXYNOS7580
Modem board: SHANNON310
Security patch: 2017-04-01
Boot Warranty bit: 1
SIM State: ABSENT
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Reading data... OK
Detecting MODEM... OK
Reading MODEM... OK
Calculating... OK
Writing zTool... OK
Initialization zTool... OK
Rebooting phone... OK
Patching CERT check... done

Done with Samsung Tool PRO v.43.23
hocam bende ng de kalıyor
 
IMEI REPAİR

Kod:
REPAIR INSTRUCTIONS:
    Phone must be rooted!
  If the software can't root the phone automatically,
  then you must root your device manually.
  1. Power on the phone.
  2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
     go to 'Settings'-'Developer options' and enable 'USB debugging'.
  3. Connect the phone to PC with USB cable, install drivers if needed.
  4. Select device in ADB settings.
  5. Fill values what you need to repair.
  6. Press 'Repair' button.
  7. Press 'Patch Certificate' if you have network problem after repairing.
  8. Press 'Reset EFS' if you need to reset it.
     Be carefully, do not perform this without necessity. Backup will be created automatically.
 
     Repair DRK (Use it if you have DRK damaged (phone stuck on boot)):
  1. Power on the phone in download mode (turn off phone, hold vol.down + Camera + Power). 
  2. Connect the phone to PC with USB cable, install drivers if needed.
  3. Press 'Repair DRK' button.

Operation: Repair
Selected model: SM-A710F
Software version: 44.4

Waiting ADB device... OK
Reading phone info...
Model: SM-A710F
Android version: 7.0
PDA version: A710FXXU2CRI2
CSC version: A710FDODD2CRH3
Phone version: A710FDXXU2CRI1
Product code: SM-A710FZKFINS
CSC country code: India
CSC sales code: INS
Phone SN: 00000000000
IMEI: 
HW version: MP 0.000
RF cal date: 20160625
Chip name: EXYNOS7580
Modem board: SHANNON310
Security patch: 2018-09-01
Boot Warranty bit: 1
SIM State: ABSENT,ABSENT
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Reading data... OK
Detecting MODEM... OK
Reading MODEM... OK
Calculating... OK
Writing zTool... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data... OK
HWID:  41 3C B9 A9 F7 20 3B E9 68 BD CB C9 04 E5 07 C2
Calculating... OK
Repairing... OK
Writing NV data... OK
Rebooting phone... OK
Repair done
Done with Samsung Tool PRO v.44.4 [SM-A710F,Repair]

PATCH CERTİFİCATE

Kod:
REPAIR INSTRUCTIONS:
    Phone must be rooted!
  If the software can't root the phone automatically,
  then you must root your device manually.
  1. Power on the phone.
  2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
     go to 'Settings'-'Developer options' and enable 'USB debugging'.
  3. Connect the phone to PC with USB cable, install drivers if needed.
  4. Select device in ADB settings.
  5. Fill values what you need to repair.
  6. Press 'Repair' button.
  7. Press 'Patch Certificate' if you have network problem after repairing.
  8. Press 'Reset EFS' if you need to reset it.
     Be carefully, do not perform this without necessity. Backup will be created automatically.
 
     Repair DRK (Use it if you have DRK damaged (phone stuck on boot)):
  1. Power on the phone in download mode (turn off phone, hold vol.down + Camera + Power). 
  2. Connect the phone to PC with USB cable, install drivers if needed.
  3. Press 'Repair DRK' button.

Operation: Patch CERT
Selected model: SM-A710F
Software version: 44.4

Waiting ADB device... OK
Reading phone info...
Model: SM-A710F
Android version: 7.0
PDA version: A710FXXU2CRI2
CSC version: A710FDODD2CRH3
Phone version: A710FDXXU2CRI1
Product code: SM-A710FZKFINS
CSC country code: India
CSC sales code: INS
Phone SN: 00000000000
IMEI: 
HW version: MP 0.000
RF cal date: 20160625
Chip name: EXYNOS7580
Modem board: SHANNON310
Security patch: 2018-09-01
Boot Warranty bit: 1
SIM State: ABSENT,ABSENT
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Reading data... OK
Detecting MODEM... OK
Reading MODEM... OK
Calculating... OK
Writing zTool... OK
Initialization zTool... OK
Rebooting phone... OK
Patching CERT check... done
Done with Samsung Tool PRO v.44.4 [SM-A710F,Patch CERT]
 
Geri
Üst Alt