Samsung Galaxy J7 2016 SM-J710F U6 IMEI Repair İşlemi

konu takibi olmuyor anlaşılan linklerin biri uçmuş
 
Kod: 
-----------------------------------------------------------------------------------
Work ID: 0000000001B51073
Platform: Samsung Android
Selected port: COM4
Selected model: SM-J710FD
Operation: Repair Network
Please, press "OK" button on the phone to allow USB debugging.
Please, press "OK" button on the phone to allow USB debugging.
Detected phone model: SM-J710F
Firmware compiled date: Thu Jul 18 21:45:53 KST 2019
PDA version: J710FXXU6CSG2
CSC version: J710FOJV6CSG1
SW version: J710FXXU6CSG3
Build number: QB13400197
Phone SN: RF8HB3Z9JZP
Android version: 8.1.0 (M1AJQ)
Sales code: XSG
Country: UAE
HW platform: exynos5
HW Chip: exynos7870
HW Modem: SHANNON315
Security patch level: 2019-07-01
Warranty Void: 1
SIM 1 status: ready
SIM 2 status: absent
Codename: j7xeltexx
Checking Root:
Phone is Rooted.
-----------------------------------------------------------------------------------
Connecting to server ..
Username: bqTGk0fZvX
Connect to server successfull.
Checking smart card...
Your balance: 170 credits.
Checking operation...OK
-----------------------------------------------------------------------------------
Repairing network. Please wait, this can take some time...OK
Network is successfully repaired.
Performed by 3.0.7 Software version.
 
Aslan0732' Alıntı:
nasıl yaptınız acaba
Genişletmek için tıkla ...
Merhaba konu başındaki cihazda yüklü olması gereken yazılım ve diğer gerekli root ve modem dosyalarını indirin, cihaza Z3x veya Octoplus üzerinden ilgili işlemleri yapın. Sorunsuz olması lazım.​
 
ysfzyemr' Alıntı:
Merhaba konu başındaki cihazda yüklü olması gereken yazılım ve diğer gerekli root ve modem dosyalarını indirin, cihaza Z3x veya Octoplus üzerinden ilgili işlemleri yapın. Sorunsuz olması lazım.​
Genişletmek için tıkla ...
Samsung tool 29.5 programla yapsam olurmu
 
U6 surumunu yukleyemiyorum hata veriyor sw rev check fail bootloader device 10 binary 6
 
ustam root attıktan sonra cihaza şebeke gelmiyor magisk ile yaptım rootu yazılım atınca düzeliyor modem attım yine aynı şekilde yardımcı olurmusunuz
Mesaj Otomatik Birleştirildi:

ustam root attıktan sonra cihaza şebeke gelmiyor magisk ile yaptım rootu yazılım atınca düzeliyor modem attım yine aynı şekilde yardımcı olurmusunuz
Subzorro' Alıntı:
Elinizde profesyonel Toollar var mı ? z3x chimera octoplus vb.
Genişletmek için tıkla ...
 
Kod: 
 REPAIR INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically, 
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press 'Repair' button.
7. Press 'Patch Certificate' if you have network problem after repairing.
8. Press 'Reset EFS' if you need to reset it.
Be carefully, do not perform this without necessity. Backup will be created automatically.

Repair DRK (Use it if you have DRK damaged (phone stuck on boot)):
1. Power on the phone in download mode (turn off phone, hold vol.down + Camera + Power). 
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Press 'Repair DRK' button. 

Operation: Repair Nov 2019
Selected model: SM-J710F
Software version: 44.4

Waiting ADB device... OK
Reading phone info...
Model: SM-J710F
Android version: 8.1.0
PDA version: J710FXXU6CSG2
CSC version: J710FOJV6CSG1
Phone version: J710FXXU6CSG3
Product code: SM-J710FZDDXSG
CSC country code: UAE
CSC sales code: XSG
Phone SN: RF8H82REE2N
IMEI: 
HW version: MP 0.300
RF cal date: 20160826
Chip name: EXYNOS7870
Modem board: SHANNON315
Security patch: 2019-07-01
Boot Warranty bit: 1
SIM State: ABSENT,ABSENT
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching server... OK
Checking server answer... OK
Executing... OK
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Writing security... OK
Rebooting phone... OK

Done with Samsung Tool PRO v.44.4 [SM-J710F,Repair Nov 2019]

Kod: 
 REPAIR INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically, 
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press 'Repair' button.
7. Press 'Patch Certificate' if you have network problem after repairing.
8. Press 'Reset EFS' if you need to reset it.
Be carefully, do not perform this without necessity. Backup will be created automatically.

Repair DRK (Use it if you have DRK damaged (phone stuck on boot)):
1. Power on the phone in download mode (turn off phone, hold vol.down + Camera + Power). 
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Press 'Repair DRK' button. 

Operation: Patch CERT Nov 2019
Selected model: SM-J710F
Software version: 44.4

Waiting ADB device... OK
Reading phone info...
Model: SM-J710F
Android version: 8.1.0
PDA version: J710FXXU6CSG2
CSC version: J710FOJV6CSG1
Phone version: J710FXXU6CSG3
Product code: SM-J710FZDDXSG
CSC country code: UAE
CSC sales code: XSG
Phone SN: RF8H82REE2N
IMEI: 
HW version: MP 0.300
RF cal date: 20160826
Chip name: EXYNOS7870
Modem board: SHANNON315
Security patch: 2019-07-01
Boot Warranty bit: 1
SIM State: ABSENT,ABSENT
Checking Super user right... true
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching server... OK
Checking server answer... OK
Executing... OK
Searching server... OK
Waiting for server answer... OK
Patching... OK
Rebooting phone... OK
Done with Samsung Tool PRO v.44.4 [SM-J710F,Patch CERT Nov 2019]

Tüm videolar: https://www.youtube.com/playlist?list=PLy3DUl4-MY1OvomBk9s5_XrY09eDLkdi1
 
Cihazda yüklü olan stock rom
Dft Pro Root Dosyası

REPAIR LOG
​
Kod: 
 Operation: Repair Nov 2019
 Selected model: SM-J710F
 Software version: 44.11
 
 Waiting ADB device... OK
 Reading phone info...
 Model: SM-J710F
 Android version: 8.1.0
 PDA version: J710FXXU6CSK1
 CSC version: J710FOXX6CSK1
 Phone version: J710FXXU6CSK1
 Product code: SM-J710FZDDETL
 CSC country code: Czech Republic
 CSC sales code: ETL
 Phone SN: RF8J70R27YB
 IMEI: 35************
 HW version: MP 0.400
 RF cal date: 20170707
 Chip name: EXYNOS7870
 Modem board: SHANNON315
 Security patch: 2019-11-01
 Boot Warranty bit: 1
 SIM State: ABSENT,ABSENT
 Initialization zTool... OK
 Running zTool, please wait... OK
 Reading data from phone... OK
 Searching server... OK
 Checking server answer... OK
 Executing... OK
 Reading data from phone... OK
 Calculating... OK
 Searching server... OK
 Waiting for server answer... OK
 Writing security... OK
 Rebooting phone... OK

PATCH CERT
​
Kod: 
Waiting ADB device... OK
 Reading phone info...
 Model: SM-J710F
 Android version: 8.1.0
 PDA version: J710FXXU6CSK1
 CSC version: J710FOXX6CSK1
 Phone version: J710FXXU6CSK1
 Product code: SM-J710FZDDETL
 CSC country code: Czech Republic
 CSC sales code: ETL
 Phone SN: RF8J70R27YB
 IMEI: 35*************
 HW version: MP 0.400
 RF cal date: 20170707
 Chip name: EXYNOS7870
 Modem board: SHANNON315
 Security patch: 2019-11-01
 Boot Warranty bit: 1
 SIM State: ABSENT,ABSENT
 Checking Super user right... true
 Initialization zTool... OK
 Running zTool, please wait... OK
 Reading data from phone... OK
 Searching server... OK
 Checking server answer... OK
 Executing... OK
 Searching server... OK
 Waiting for server answer... OK
 Patching... OK
 Rebooting phone... OK
 
eng modem linki baseband unknown sorununa yol açıyo linki kaldırın lütfen.modemsiz oluyor zaten.
 
Son düzenleme:
Cevap yazmak için giriş yap yada kayıt ol.
Geri
Üst Alt