Çözüldü Samsung Galaxy Note 10 Plus SM-N976B U7 Android 11 Patch Certificate

[silivriserdar]

Merhaba GSM Turkey Üyeleri bu paylaşacağım konuda Samsung Galaxy Note 10 Plus SM-N976B U7 cihazına nasıl patch Certificate İşlemi yapılır onu anlatacağım. Ben bu işlemi Z3X Box Samsung Tool ile yaptım. Bu araç ücretli bir araçtır.

YAZILIM

ROOT MAGİSK KULLANILMIŞTIR.

Lütfen konu altına yorum yaparken Teşekkürler, Elinize sağlık, süper, sağol, helal olsun gibi kelimeler yazıp konuları kirletmeyelim. Herkes aradığını bu mesajlar yüzünden bulamıyor. Altta beğen butonuna basmanız yeterlidir. Konu ile ilgili sorununuzu veya çözümünüz varsa yorum yapın. Konu ile alakasız cevaplar silinecektir. ​

​

 REPAIR INSTRUCTIONS:
1. Power on the phone.
2. Enable 'USB debugging' in 'Settings'-'Developer options',
tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Reboot to...' button and select mode to reboot (download or recovery). 

Operation: Patch Certificate
Selected model: SM-N976B
Software version: 43.7

Waiting ADB device... OK
Reading phone info...
Model: SM-N976B
Android version: 11
PDA version: N976BXXU7FUE3
CSC version: N976BOXM7FUE3
Phone version: N976BXXU7FUE1
Product code: SM-N976BZSABTU
CSC country code: UK & IRE
CSC sales code: BTU
Carrier ID: BTU
Phone SN: RFCM90BYPDY
IMEI: 
HW version: REV0.6
RF cal date: 20190921
Chip name: EXYNOS9825
Modem board: SHANNON50005100
Security patch: 2021-05-01
Boot Warranty bit: 1
SIM State: LOADED
Checking Super user right... true
Root version: 23.0:MAGISKSU
Checking data... OK
Searching server... OK
Checking server answer... OK
Data preparation... OK
Searching server... OK
Waiting for server answer... OK
Patching... OK
Rebooting phone... OK
Done with Samsung Tool PRO v.43.7

 

[hsmobile09]

Hello GSM Turkey Members, in this topic I will share, I will explain how to make a patch Certificate Process on the Samsung Galaxy Note 10 Plus SM-N976B U7 device. I did this with Z3X Box Samsung Tool. This tool is a paid tool.



SOFTWARE



USED ROOT MAGISK.



Please, when commenting under the subject, let's not pollute the topics by writing words such as Thanks, Good luck, super, thank you, halal. Not everyone can find what they are looking for because of these messages. Just hit the like button below. Comment if you have a problem or solution on the subject. Irrelevant answers will be deleted.

​

 REPAIR INSTRUCTIONS:
1. Power on the phone.
2. Enable 'USB debugging' in 'Settings'-'Developer options',
tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Reboot to...' button and select mode to reboot (download or recovery).

Operation: Patch Certificate
Selected model: SM-N976B
Software version: 43.7

Waiting ADB device... OK
Reading phone info...
Model: SM-N976B
Android version: 11
PDA version: N976BXXU7FUE3
CSC version: N976BOXM7FUE3
Phone version: N976BXXU7FUE1
Product code: SM-N976BZSABTU
CSC country code: UK & IRE
CSC sales code: BTU
Carrier ID: BTU
Phone SN: RFCM90BYPDY
IMEI:
HW version: REV0.6
RF cal date: 20190921
Chip name: EXYNOS9825
Modem board: SHANNON50005100
Security patch: 2021-05-01
Boot Warranty bit: 1
SIM State: LOADED
Checking Super user right... true
Root version: 23.0:MAGISKSU
Checking data... OK
Searching server... OK
Checking server answer... OK
Data preparation... OK
Searching server... OK
Waiting for server answer... OK
Patching... OK
Rebooting phone... OK
Done with Samsung Tool PRO v.43.7

AFTER DONE STILL NG

 

[silivriserdar]

 REPAIR INSTRUCTIONS:
1. Power on the phone.
2. Enable 'USB debugging' in 'Settings'-'Developer options',
tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Reboot to...' button and select mode to reboot (download or recovery). 

Operation: Repair
Selected model: SM-N976B
Software version: 44.11

Waiting ADB device... OK
Reading phone info...
Model: SM-N976B
Android version: 11
PDA version: N976BXXS7FUL2
CSC version: N976BOBE7FUH3
Phone version: N976BXXS7FUI5
Product code: SM-N976BZSAEVR
CSC country code: UK
CSC sales code: EVR
Carrier ID: EVR
Phone SN: RFCMB02K9MV
IMEI: 
HW version: REV0.6
RF cal date: 20191121
Chip name: EXYNOS9825
Modem board: SHANNON50005100
Security patch: 2021-12-01
Boot Warranty bit: 1
SIM State: ABSENT
Checking Super user right... true
Root version: 1.3:MAGISK (TR_Tools_Patcher V1.3)
Checking data... OK
Searching server... OK
Checking server answer... OK
Data preparation... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing 1st step... OK
Executing 2nd step... OK
Searching server... OK
Waiting for server answer... OK
Reparing... OK
Rebooting phone... OK
Done with Samsung Tool PRO v.44.11 [SM-N976B,Repair]


REPAIR INSTRUCTIONS:
1. Power on the phone.
2. Enable 'USB debugging' in 'Settings'-'Developer options',
tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Reboot to...' button and select mode to reboot (download or recovery). 

Operation: Patch Certificate
Selected model: SM-N976B
Software version: 44.11

Waiting ADB device... OK
Reading phone info...
Model: SM-N976B
Android version: 11
PDA version: N976BXXS7FUL2
CSC version: N976BOBE7FUH3
Phone version: N976BXXS7FUI5
Product code: SM-N976BZSAEVR
CSC country code: UK
CSC sales code: EVR
Carrier ID: EVR
Phone SN: RFCMB02K9MV
IMEI: 
HW version: REV0.6
RF cal date: 20191121
Chip name: EXYNOS9825
Modem board: SHANNON50005100
Security patch: 2021-12-01
Boot Warranty bit: 1
SIM State: ABSENT
Checking Super user right... true
Root version: 1.3:MAGISK (TR_Tools_Patcher V1.3)
Checking data... OK
Searching server... OK
Checking server answer... OK
Data preparation... OK
Searching server... OK
Waiting for server answer... OK
Patching... OK
Rebooting phone... OK
Done with Samsung Tool PRO v.44.11 [SM-N976B,Patch Certificate]

 

[kerim01]

Merhaba n976b bu yazılımı yuklemeye calsıyorum odınle de aynı pıt hatası verıyor z3x aynı buna nasıl bır cozum bulabılırım yazılımı dahı atamadım repaır kısmana daha dokunamadık

 

[suha28]

Kullanmakta oldugum cihaz N976N modeli turkce dil destegi olmadigi icin rom yukledim ve Android i yukselttim cihaz suan N976B/DS olarak gozukmekte cift hatli. Cihaza IMEI repair yapamadik bir türlü yardımcı olursanız sevinirim şimdiden teşekkürler.

Mesaj Otomatik Birleştirildi: 3 Kas 2022

Merhaba GSM Turkey Üyeleri bu paylaşacağım konuda Samsung Galaxy Note 10 Plus SM-N976B U7 cihazına nasıl patch Certificate İşlemi yapılır onu anlatacağım. Ben bu işlemi Z3X Box Samsung Tool ile yaptım. Bu araç ücretli bir araçtır.



YAZILIM



ROOT MAGİSK KULLANILMIŞTIR.



Lütfen konu altına yorum yaparken Teşekkürler, Elinize sağlık, süper, sağol, helal olsun gibi kelimeler yazıp konuları kirletmeyelim. Herkes aradığını bu mesajlar yüzünden bulamıyor. Altta beğen butonuna basmanız yeterlidir. Konu ile ilgili sorununuzu veya çözümünüz varsa yorum yapın. Konu ile alakasız cevaplar silinecektir.

​

 REPAIR INSTRUCTIONS:
1. Power on the phone.
2. Enable 'USB debugging' in 'Settings'-'Developer options',
tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Reboot to...' button and select mode to reboot (download or recovery).

Operation: Patch Certificate
Selected model: SM-N976B
Software version: 43.7

Waiting ADB device... OK
Reading phone info...
Model: SM-N976B
Android version: 11
PDA version: N976BXXU7FUE3
CSC version: N976BOXM7FUE3
Phone version: N976BXXU7FUE1
Product code: SM-N976BZSABTU
CSC country code: UK & IRE
CSC sales code: BTU
Carrier ID: BTU
Phone SN: RFCM90BYPDY
IMEI:
HW version: REV0.6
RF cal date: 20190921
Chip name: EXYNOS9825
Modem board: SHANNON50005100
Security patch: 2021-05-01
Boot Warranty bit: 1
SIM State: LOADED
Checking Super user right... true
Root version: 23.0:MAGISKSU
Checking data... OK
Searching server... OK
Checking server answer... OK
Data preparation... OK
Searching server... OK
Waiting for server answer... OK
Patching... OK
Rebooting phone... OK
Done with Samsung Tool PRO v.43.7

Kullanmakta oldugum cihaz N976N modeli turkce dil destegi olmadigi icin rom yukledim ve Android i yukselttim cihaz suan N976B/DS olarak gozukmekte cift hatli. Cihaza IMEI repair yapamadik bir türlü yardımcı olursanız sevinirim şimdiden teşekkürler.