Çok eski bir web tarayıcısı kullanıyorsunuz. Bu veya diğer siteleri görüntülemekte sorunlar yaşayabilirsiniz.. Tarayıcınızı güncellemeli veya alternatif bir tarayıcı kullanmalısınız.
Step 1: Driver Installation
1. Open Driver Auto Installer folder and Run Install.bat
2. Wait until program install the drivers.
You will see that screen if the drivers were installed successfully.
Step 2: Update (Flashing)
1. Open One Key Flashing(Be Pro 2) folder and Run SP_Facility_DL_Tool.exe
2. Turn off the phone, take out the battery, connect your phone to the PC via USB and press Scan button.
3. After N/A+COM(x) sign appear (look at the picture), disconnect your phone, press Star button and connect your phone again (Don't forget to put the battery back to your phone).
Step 1: Driver Installation
1. Open Driver Auto Installer folder and Run Install.bat
2. Wait until program install the drivers.
You will see that screen if the drivers were installed successfully.
Step 2: Update(Flashing)
1. Open One Key Flashing(Be Touch 3) folder and Run SP_Facility_DL_Tool.exe
2. Turn off the phone, take out the battery, connect your phone to the PC via USB and press Scan button.
3. After N/A+COM(x) sign appear (look at the picture), disconnect your phone, press Star button and connect your phone again (Don't forget to put the battery back to your phone).
4. Wait until Flashing Utility update your phone.
Please go to Settings - About Phone and check the build number. If the there is the letter "M" following the number, please try option 1 and 2. Otherwise, please try option 3 and 4.
Step 2: Update(Flashing)
1. Open One Key Flashing(Be Touch) folder and Run SP_Facility_DL_Tool.exe
2. Turn off the phone, take out the battery, connect your phone to the PC via USB and press Scan button.
3. After N/A+COM(x) sign appear (look at the picture), disconnect your phone, press Star button and connect your phone again (Don't forget to put the battery back to your phone).
Step 2: Update(Flashing)
1. Open One Key Flashing(Be Pure) folder and Run SP_Facility_DL_Tool.exe
2. Turn off the phone, take out the battery, connect your phone to the PC via USB and press Scan button.
3. After N/A+COM(x) sign appear (look at the picture), disconnect your phone, press Star button and connect your phone again (Don't forget to put the battery back to your phone).
Step 2: Update(Flashing)
1. Open One Key Flashing(Be One) folder and Run SP_Facility_DL_Tool.exe
2. Turn off the phone, take out the battery, connect your phone to the PC via USB and press Scan button.
3. After N/A+COM(x) sign appear (look at the picture), disconnect your phone, press Star button and connect your phone again (Don't forget to put the battery back to your phone).
Update (Flashing)
1. Open One Key Flashing(Be Pro) folder and Run SP_Facility_DL_Tool.exe
2. Turn off the phone, take out the battery, connect your phone to the PC via USB and press Scan button.
3. After N/A+COM(x) sign appear (look at the picture), disconnect your phone, press Star button and connect your phone again (Don't forget to put the battery back to your phone).