silivriserdar

Genel Moderator
Katılım
21 Haz 2018
Mesajlar
22,005
Tepkime puanı
44,733
Puanları
113
Yaş
40
Çevrimdışı
Merhaba GSM Turkey Üyeleri bu paylaşacağım konuda Huawei Nova 9 SE JLN-LX1 cihazına ait Huawei ID Remove başarı raporunu paylaşacağım.
Ben bu işlemi Octoplus Box Huawei Tool ile yaptım. Bu araç ücretli bir araçtır.

BU CİHAZ UZAKTAN BAĞLANTI İLE YAPILABİLMEKTEDİR

İLETİŞİM İÇİN WHATSAP HATTIMIZİÇİN TIKLAYIN.


İLETİŞİM İÇİN TELEGRAM ADRESİMİZ TIKLAYIN.

Kod:
Welcome to Octoplus Huawei Software v. 1.3.4 

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:
1: COM28 Qualcomm HS-USB QDLoader 9008

Job ID: 00000000018E6B29
2024-04-23 14:25:12
Starting Reset Huawei ID
Selected phone model:  JLN-LX1 
Warning: Please, make sure the phone`s battery is fully charged and connected, after connect the device via Factory Mode (use Hardware Test Point or "ON/OFF Factory Mode option").
Warning: Selected response: Proceed
Downloading resource...
Downloading resource...
Downloading resource...
Searching Qualcomm HS-USB QDLoader 9008 port...
Please, reconnect battery, connect USB cable with attached Test Point on your phone!
Detected  Qualcomm HS-USB QDLoader 9008  port
Connecting to device...
Hadshaking...
Reading bootloader info...
OEM PK HASH: B25DECD85D217F5D9B53DC3C42EF7846DCEF59DD3E0AF4D12606199F5099FF23
MSM HW ID: 001B80E1
Serial Number: 4502B7D6
Sending loader Qualcomm Snapdragon 680V.0.mbn...
Loader send successfully
Reconnecting, please wait...
Configuring device...
Reading partition table...
Creating backup...
Backup saved to JLN-LX1_BACKUP_FIRMWARE_2024-04-23_17-25-54.
Searching for Huawei Id protection...
Resetting Huawei Id...
Performing factory reset...
Please perform the factory reset operation manually through the recovery mode if the operation was not done automatically
Reset Huawei ID done.
Performed by  1.3.4  Software version.

Lütfen konu altına yorum yaparken Teşekkürler, Elinize sağlık, süper, sağol, helal olsun gibi kelimeler yazıp konuları kirletmeyelim.
Herkes aradığını bu mesajlar yüzünden bulamıyor.
Altta beğen butonuna basmanız yeterlidir.
Konu ile ilgili sorununuzu veya çözümünüz varsa yorum yapın.
Konu ile alakasız cevaplar silinecektir.

photo_2024-04-24_10-50-10.jpg
 
Geri
Üst Alt