Rikoby
Üye
- Katılım
- 15 Ara 2018
- Mesajlar
- 535
- Tepkime puanı
- 622
- Puanları
- 93
Çevrimdışı
Selam ustalar J500f cihazi var elimde cert yazdigimda boyle bir hata aliyorum elmde bir tane z3x box var
BACKUP INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read EFS' button to read backup or 'Write EFS' to restore or
press 'Write CERT' to restore certificates.
To backup/restore QCN, phone diagnostic port must be enabled.
1. Power on the phone.
2. Type *#0808# and select 'DM+MODEM+ADB'.
3. Type *#9090# and select 'DM/DUN over HSIC'.
Or use 'Activate Diag' function from 'Repair' tab.
4. Connect the phone to PC with USB cable, install drivers if needed.
5. Select diagnostic port in port settings.
6. Press 'Read QCN' button to read NV backup or 'Write QCN' to restore.
Operation: Write CERT
Selected model: SM-J500F
Selected port: COM14 SAMSUNG Mobile USB Serial Port
Software version: 43.20
Checking CERT file... OK
KEY ID: 0241
Waiting ADB device... OK
Reading phone info...
Model: SM-J500F
Android version: 6.0.1
PDA version: J500FXXU1BSF2
CSC version: J500FOJV1BSF1
Phone version: J500FDDU1AOJ1
Product code: SM-J500FZWATUR
CSC country code: TURKEY
CSC sales code: TUR
Phone SN: RV8H50....
IMEI: 35800307299.....
HW version: MP 0.400
RF cal date: 2016.07.25
Chip name: MSM8916
Modem board: MSM8916
Security patch: 2017-08-01
Boot Warranty bit: 1
Writing AT RIL... OK
Initialization AT RIL... root required
Checking Super user right... true
Initialization AT RIL... OK
Bypass MSL... OK
Checking for compatible phone and cert... error
This CERT file is not compatible for this phone, KEY ID: 0338
Done with Samsung Tool PRO v.43.20
BACKUP INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read EFS' button to read backup or 'Write EFS' to restore or
press 'Write CERT' to restore certificates.
To backup/restore QCN, phone diagnostic port must be enabled.
1. Power on the phone.
2. Type *#0808# and select 'DM+MODEM+ADB'.
3. Type *#9090# and select 'DM/DUN over HSIC'.
Or use 'Activate Diag' function from 'Repair' tab.
4. Connect the phone to PC with USB cable, install drivers if needed.
5. Select diagnostic port in port settings.
6. Press 'Read QCN' button to read NV backup or 'Write QCN' to restore.
Operation: Write CERT
Selected model: SM-J500F
Selected port: COM14 SAMSUNG Mobile USB Serial Port
Software version: 43.20
Checking CERT file... OK
KEY ID: 0241
Waiting ADB device... OK
Reading phone info...
Model: SM-J500F
Android version: 6.0.1
PDA version: J500FXXU1BSF2
CSC version: J500FOJV1BSF1
Phone version: J500FDDU1AOJ1
Product code: SM-J500FZWATUR
CSC country code: TURKEY
CSC sales code: TUR
Phone SN: RV8H50....
IMEI: 35800307299.....
HW version: MP 0.400
RF cal date: 2016.07.25
Chip name: MSM8916
Modem board: MSM8916
Security patch: 2017-08-01
Boot Warranty bit: 1
Writing AT RIL... OK
Initialization AT RIL... root required
Checking Super user right... true
Initialization AT RIL... OK
Bypass MSL... OK
Checking for compatible phone and cert... error
This CERT file is not compatible for this phone, KEY ID: 0338
Done with Samsung Tool PRO v.43.20